Lafayette Consolidated Government has an ongoing Point Address project to identify and attribute each physical address in the Parish. The aerial photos along with the Parish’s Street Centerlines are the back-drop by which the addresses are located. These address points do not include ownership or occupant. They are intended to form a single source for physical address recordation and issuance.
Since the Street Centerlines with Point Addresses Map is an ongoing project, there are many structures that have not been identified and verified. A future Web based project may allow Citizens to identify and report addresses that are not currently captured.
How To Use
Click on the Street Centerlines with Point Addresses Map link in the GIS MENU sidebar. An Interactive Map page is displayed. A Progression indicator floats atop the map area to show that the server is busy by displaying a black banner labeled “Retrieving map”. Any time this banner is visible do not click on the map until the map image retrieval is finished (Time dependent upon connection speed and server load).
The initial Map display reveals the street centerlines for the entire Parish. The Layers Table of Contents(TOC) is displayed. The user can Check or Uncheck and Refresh Map to display different combinations of information. The Aerial Photos, both 1998 colored photos and 2001 infrared photos, are set not to turn on until the user has zoomed into a viewable scale.
They are set to not turn on to prevent a user with a low speed connection from appearing to hang. The hang effect will be caused by the huge amount of data that is necessary to transmit an image of a large section of the Parish.
Notice on the left frame there is a set of tools on a toolbar. The currently selected tool is identified by a red outline box. Any time you click on the map area the function of the currently selected tool will be carried out. If you hover your mouse icon over each tool’s Icon a pop up label will tell you what the tool does.
This Interactive Map is designed for the user to type in an Address (must be a valid House number and street name or two intersecting streets) and click on the Locate button. The map will auto zoom to that Address area.
Once an address is zoomed to, the searched address label will appear along with labeled street names. The 1996 color aerial photos should be turned on. A blue dot will be located atop each physical structure that has been entered to date. The blue dot is the feature of the point address layer and if you select the “i” Identify tool and click on any blue dot you will see its attribute which defines its address number, street name, city, unit, building number and unit range.
If you want further information or want details on the active layer, click the black “i” information Icon on the toolbar. Notice, the Identify icon becomes surrounded by a red outline box (becomes the selected tool). Click on any feature on the Active Layer for information about that feature. If many features are selected you can view all of them by scrolling up or down in the bottom frame.
To change the Active Layer or to change the Layers being viewed, you toggle the Legend to a Layer List. To do so hover your mouse over the most upper left toolbar icon and see it display “Toggle between Legend and Layer list”. Click this Icon and observe the rightmost frame now displays a Layer list having Check boxes next to all available layers.
Click the Radio button to select any layer as the Active Layer. The Active Layer will be the layer to be used if the Identify, Find or Query tool is used.
Check the box (Click on the Checkbox) next to any and/or all layers you wish to display or uncheck any box associated with a layer you do not wish to display. Once the layers are Checked or Unchecked click the Refresh Map button for the changes to take effect. Allow the Progression bar to go away before clicking on the map. Once layers are selected you may toggle back to the Legend list by clicking the previously mentioned Icon.
Note: The more layers you Check to display, the slower will be the update for the map image, therefore if you are on a slow connection you may want to limit your layer display to as few as possible to maximize your response time. While you may zoom out with additional layers Checked and turned on, be aware that your response time will also be much slower as data from each turned on layer has to be processed over a larger and larger area as you zoom out.
If you find your computer not responding fast enough or you’ve waited as long as you are willing, click on the Interactive Maps upper right “CLOSE” box to close the Map and place you back at the GIS MENU page. OR, once you have finished using the Interactive Map, you end your session by clicking the “CLOSE” box.
Do not use your browsers “BACK” page or arrow to get back to the GIS MENU. The interactive Map Server does not allow the normal function of these back functions and will only cause the map to un-draw and display unexpected results. Click the “CLOSE” box, or click the "Back" link (See Below) in the Left Tool bar Frame. Re-launch the Interactive Map from the GIS MENU page to begin again.
Contact Us |
Site Map |
705 West University Avenue, Lafayette, Louisiana 70506
For General Information/Questions Please Call: (337) 291-8200